# Access to Valhalla {% embed url="" %} ## Get Access Through Discord 1\. Join our Discord Community here: ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FAaXNflIuImuWdXLl3he4%2FTicket.png?alt=media\&token=0e951073-30a2-4192-813e-5cbf599475fe) 2\. Open the support channel and press the "Create Ticket" button.​ Inside the ticket, send us a message with the following information: * Your Email​ (Payment email if you already purchased your membership) * Your TradingView Username (Must be 1 month old if requesting your free trial) * **Optional:** Your Telegram Username (If you would like access to our VIP Telegram Community) Example:​ ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2F3uFu5fB91aOyIGLADGBZ%2FTicket%20info.png?alt=media\&token=522d3a94-a3c7-4a59-98b0-2cf0de2e6624) 3. We will grant you access to the indicator and VIP role to access our exclusive Discord channels within some hours and let you know through the ticket once it's done. ## Get Access Through Telegram 1. Send us a message on Telegram with the following information: * Your Email​ (Payment email if you already purchased your membership) * Your TradingView Username (Must be 1 month old if requesting your free trial) ## Get Access Through Email If you don't have Discord or Telegram and would like to request access to Valhalla reach out to with: * Your Email​ (Payment email if you already purchased your membership) * Your TradingView Username (Must be 1 month old if requesting your free trial) # Setup Valhalla Indicator on TradingView In order to use the indicator, you need to open a chart on TradingView. Once open, click on **Indicators** (or type **/** ) to open the indicator menu, then click on "**invite-only scripts**", you should see the indicators names appearing, select Valhalla to add it to your chart. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2F8Fnin8kx6UOcCzWpkAok%2FIndicator-invite-only-2.jpg?alt=media\&token=5cf23d66-537a-4060-8266-5c46cb4f6be7) {% hint style="info" %} If you don't see the invite-only scripts folder or Valhalla Indicator, try refreshing your browser/app. If this still doesn't have them show up, please open a ticket through our Discord or email with your TradingView username & our team will grant you access manually within 6 hours. {% endhint %} If you need to quickly access the indicators you can add them to your favorites by clicking on the star at the left, you will then be able to load the starred indicator directly from your favorites. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2Fv0KGWUDnbbBTtmteJRh0%2Fimage.png?alt=media\&token=f66133fe-c9a6-4446-a1e8-65df51aabdc2) Turn off the Indicator Values:
{% hint style="info" %} Optional: If you also wish to use the default **Valhalla** candle colors, you can change them in your settings as follows: * Bullish candle: #ffffff * Bearish candle: #006dff {% endhint %} ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2F8k8P33PdaYeKJLjbjhNL%2FCandle%20colors.png?alt=media\&token=bdb67068-4b73-4aad-80cd-b163b2b69f01) # Setup & How To Use {% embed url="" %} Once you have added Valhalla to your chart, you can start unleashing its power. {% hint style="warning" %} Add the custom watchlist from all of the current Valhalla Strategies to your chart using this link: Click "Make a copy" {% endhint %} Click on the "Settings" icon right next to the indicator name to bring up the configuration panel. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FKAOG9l68XQz0ioLQbc5W%2Fimage.png?alt=media\&token=d7177d14-f1e2-49b5-a181-331a5ba513fa) From here you will find 3 different sections: ## **Strategy** ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2Ffo2zDupjDOX69UsH3NNG%2FStrategy.png?alt=media\&token=8494eddc-e368-4fa2-8ea0-a2bdee391a64) This is where you will find all of the Valhalla Custom Optimized Strategies for specific assets. Choose the one that you wish to use. (Keep in mind that this will change the results generated by Valhalla) {% hint style="warning" %} **Always make sure to choose the specific asset & timeframe that the strategy was created for.** *Example:* BTCUSDTPERP - Binance | **15min** {% endhint %} ![You will open BTCUSDTPERP from Binance and choose the "15m" timeframe accordingly.](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2Fa1LCl8SBhWCkWxooTNOF%2F5.png?alt=media\&token=f167c8d5-1190-46a8-9314-c85ff574f8c2) ## General Settings
* Use the opposite signal as Stop-Loss: When this function is disabled it will also consider the fixed stop loss % that you set below instead of closing the trade only by the opposite signal. While this function can lead to more volume of trades, always double check to see which option gives better performance and adjust according to your own trading style and strategy. ## Visual Inputs
* **Panel:** Change between Statistics/Helper Panel/Off * **Panels Size:** Change between Regular/Small/Tiny * **Theme:** Change between Default/Classic ## General Settings
* **Show Peak Labels:** Enable or Disable the Peak labels. This label will show the highest point the price has reached within a Long trade and the lowest within a Short trade.
* **Peak Labels Size:** * **Show Entry & Take Profit Labels:**
## Accuracy & Statistics You will be able to view the Statistics panel in your chart as follows:
You will find useful info regarding the accuracy of the different Take Profit Levels from the latest signals. The profit table is meant to illustrate the results of entering and exiting the 100% of the position on a specific TP. The total profit including the stop-losses is displayed in the Net Profit row. ## Helper Panel The helper panel will show you all of the info you need to know regarding the current & next trade Entries, Take Profit Levels and Stop-Loss.
## Entering Trades By default, Valhalla will load up with the "Use the opposite signal as Stop Loss" enabled, this means that there will always be an active trade, such as follows:
When this function is disabled, there will be times when there wont be any active trade, the details of the most probable position will show in the helper panel.
If you are ready to prepare your trade ahead of time, go ahead and set your pending market stop order (using Stop Market) at the indicated entry price in advance. {% hint style="danger" %} Entry price could change at some point, so if you schedule one trade ahead of time and it takes long to execute, make sure to open up Valhalla and check if it has changed. {% endhint %} For example, if you want to enter a long position at 60$ (current price - let's say 56$), set the trigger price to $60 and press the Buy/Long option depending on your strategy. ![](https://teletype.in/files/53/d0/53d0797a-0f14-4577-875c-553d74edea9d.png) You can also set a take-profit in advance (**using Regular Limit order**). For instance, set trigger price to 61$, and press Sell/Short. ![](https://teletype.in/files/72/94/7294391d-b2a6-4b04-b255-a60ac63e8e33.png) All set by now! ![](https://teletype.in/files/9c/3a/9c3abdf6-e67f-4dac-8b66-b1aa22c4fdfe.png) ## Take Profit Levels The Take Profit Levels will be shown in the chart as the green lines during a trade. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FI9cTzZnN1hPV0kBChSSn%2FTake%20profit%20Levels.png?alt=media\&token=c03d4a74-14aa-4c85-a207-9a648e001b42) This values will be shown in the Helper Panel for the current and next trade respectively:
(Remember that the TP and SL values for the next trade can change dynamically)

(Remember that the TP and SL values for the next trade can change dynamically)

You can also view which TP's of the current trade have been hit, a green checkmark will appear. And also the strategy % values of the TP/SL are displayed. ## 🎯 Streamlined Take Profit System Now featuring just 3 strategic TP levels - each designed for different trader profiles: 🔎 Robustness by TP Profile TP1: Low R:R (0.4 – 0.8), High Accuracy (85%+) ✅ Pros:\ Frequent wins, high “hit rate.”\ Feels rewarding in the short term. ❌ Cons:\ Losses much larger than wins → one loss can erase several gains.\ Psychologically draining when streaks of small wins vanish to a single big loss. ⚠️ Verdict: Not very robust for long-term. Only viable with strict execution and continuous performance grade monitoring. 👤 Trader Fit: Appeals to beginners who want fast gratification, but dangerous without strong discipline. TP2: Balanced (R:R 0.8 – 1.2, Accuracy 70%+) ✅ Pros:\ Best compromise between accuracy and reward.\ Survives volatility better since targets aren’t too tight.\ Easier to follow consistently without psychological strain. ⚖️ Verdict: Most robust overall. Reliable balance of expectancy, psychology, and execution resilience. 👤 Trader Fit: Best for most traders, especially those seeking long-term consistency and smoother execution. TP3: High R:R (1.2 – 1.5+), Lower Accuracy (40–70%) ✅ Pros:\ Stronger risk/reward ratio.\ Captures bigger moves and longer trends.\ Usually results in the best expectancy per trade and overall net profit. ❌ Cons:\ Extended losing streaks.\ Many traders give up before large winners play out.\ Requires confidence in the edge and tolerance for variance. ⚖️ Verdict: Robust in theory, but demanding in practice. Works best with automation or highly disciplined traders. 👤 Trader Fit: Suited for experienced traders who can stomach drawdowns, or those running systematic/automated strategies.
## 📊 New Performance Grading System Every alert now includes a Performance Grade based on TP3 data, evaluating three core metrics: Formula: Average R/R Ratio + Profit Factor + Accuracy 🔥 STRONG: Avg R/R: >= 1.2\ Profit Factor: >= 1.3\ Accuracy >= (Breakeven Accuracy + 7%) 👍 SOLID: Avg R/R: >= 0.9\ Profit Factor: >= 1.1\ Accuracy >= (Breakeven Accuracy + 4%) Else ⚠️ RISKY ## Take Profit Strategies 1. Close the position in parts, for example: 50% on TP2 and 50% on TP 3. 2. Close the whole position on a specific target, for example: 100% on TP3. (Our Favorite Strategy) 3. After reaching a certain target (TP3 for example), move the SL to the entry price and move it higher and higher as the profit grows. ## **Our Favorite Strategy for Crypto:** * Only signals with solid or strong performance grade * 1% of capital at risk per trade * Isolated Leverage * 100% Take Profit on TP3 * No more than 1-3 trades open at the same time * Longs + Shorts following the trend * SL: Opposite Signal (Adjust Dynamically) :warning: We advice you to create your own strategy according to your trading style, risk & capital management. # How To Use Scalper? {% hint style="warning" %} The scalper indicator is intended to be used along the main indicator, in order to be able to trade the range within a established direction. {% endhint %} {% embed url="" %} ## **Liquidity Levels** **Untapped Levels:** Unlock Hidden Opportunities! We all know that the real action happens behind swing points and beyond the highs and lows of previous days, weeks, and months. These untapped levels are the treasure troves of liquidity, filled with resting orders, especially those sneaky stop-loss orders. Valhalla now tracks these untapped levels, preserving their liquidity for your trading advantage. **Liquidity Pools:** Your Secret to Market Mastery! Once you identify a liquidity level, magic happens. These clusters of liquidity levels act like powerful magnets, drawing price action towards them. It's like a treasure hunt for traders! The closer the liquidity pool, the smoother the ride, and the more straightforward the path. This is the phenomenon known as a liquidity grab or sweep – it's your ticket to trading success. With Valhalla, you'll be able to spot these liquidity pools and frame your directional bias with ease. They will serve you as an additional confluence for your entries and exits. ### **Scalper Alerts**
If enabled, will be triggered using the "Any Alert Function Call" Condition when creating an alert:
Additionally if you have the LIFETIME membership, you will also be able to automate the scalper signals by using conditional alerts for specific signals and direction:
# How To Use Scalper? {% hint style="warning" %} The scalper indicator is intended to be used along the main indicator, in order to be able to trade the range within a established direction. {% endhint %} {% embed url="" %}
The Scalper Indicator features 3 different types of signals, keeping the essence and accuracy of Valhalla by showing you in real time the levels where they will trigger as soon as price reaches it (without needing to wait for candle close) so that you can continue preparing your trades ahead of time as you are used to with Valhalla:
🟢 🔴 **Buy/Sell 1 | Circle Signals.** This signals are triggered with the most frequency. They are intended for more experienced traders that prefer scalping with a bigger volume of signals trading almost every local top/bottom. 🔺🔻 **Buy/Sell 2 | Triangle Signals.** Medium zone, this signals will fit most traders. They will trigger when the price reaches the zone but the momentum and volume isn't enough to reach the higher zone. 🔷 🔶 **Buy/Sell 3 | Diamond Signals.** In a range market, when price reaches the Diamond zone it means that a strong deviation from the average has occurred and there is a high probability that it will return to the average zone, or at least the underlying zone. This signals could also indicate a change in trend if broken. At first glance it could look a bit intimidating, but as you get to experiment with it, you will be able to turn on/off the signals that you don't want to see and adjust the scalping algorithm with a variety of formulas and sensitivity. ## **How To Trade Scalper Signals?** To get the most out of the scalper mode, it is recommended that you only take signals following the trend from the current main Valhalla trade according to each strategy. If you like a higher trade frequency, BUY/SELL 1 - Circle Signals 🟢 🔴 will be a good fit. Preferably, you will want to trade the BUY/SELL 2 - Triangle Signals for medium frequency. 🔺🔻 And use the BUY/SELL 3 - Diamond Signals 🔷 🔶 as indicator of potential reversals or change in trend. ### **Entry and Take Profit:** Let's take a look at one way of using the Scalper Mode in combination of the Main Valhalla Strategies:

LONG Valhalla Main Trade

During a LONG main Valhalla trade, we would preferably take entries only on the Buy Scalper Signals, **Green Triangles on this example**, and exit on the opposite Red Triangle. Same applies to using the circle and diamond signals.

On this example the main Valhalla indicator is currently in a Short trade, so you should focus mainly on following sell signals for scalper entries, meaning the red circles, triangles or gold diamonds.

The same would apply viceversa during a SHORT trade, for example we take only entries from the Red Circles and exit on the Green ones. ### When to avoid signals? It is recommended to skip signals if the main indicator trade already reached the Take Profit Level 3. For example:
### **Stop Loss and when to Re enter:** Let's say that the asset that we are looking at, has been ranging in the past on an average of 2%, like the following example for BUY/SELL 2 (Triangle Signals):
We can consider this same amount to use as Stop-Loss range, so we have a 1:1 Risk Reward ratio. And let's say that our Stop-Loss was hit, as on the following example:
You would preferably resume your trades until AFTER an opposite signal of the same level has appeared (Red Triangle inside Yellow Circle in this example), meaning that a range could soon start being established. So you would wait and enter until the next Buy Signal has appeared (Green Triangle inside Green Circle) and Take Profit normally on the next **Red Triangle.** Here we have another example, where an opposite signal didn't appear after hitting our Stop-Loss or after a Diamond Signal appeared:
This means that after our failed trade, we wouldn't have entered on all of those other Green Triangle Signals, since an opposite Red Triangle is still yet to come. This will help you avoid this kind of scenarios when price changes the trend and re assure that you resume your trading until the next possible range has started to form. ## **Scalper Settings**
Turn on/off the different Scalper Signals. Show scalper bands:
**Formula:** Changes the formula behind the scalper algorithm, resulting in different signals being triggered. **Window:** The amount of candles to consider for the range to calculate the signals. A lower value will use recent data. A range between 100-500 is recommended. You will need to experiment and backtest with this settings on each different asset and timeframe, as optimization will always be possible. ## **Liquidity Levels**
**Untapped Levels:** Unlock Hidden Opportunities! We all know that the real action happens behind swing points and beyond the highs and lows of previous days, weeks, and months. These untapped levels are the treasure troves of liquidity, filled with resting orders, especially those sneaky stop-loss orders. Valhalla now tracks these untapped levels, preserving their liquidity for your trading advantage. **Liquidity Pools:** Your Secret to Market Mastery! Once you identify a liquidity level, magic happens. These clusters of liquidity levels act like powerful magnets, drawing price action towards them. It's like a treasure hunt for traders! The closer the liquidity pool, the smoother the ride, and the more straightforward the path. This is the phenomenon known as a liquidity grab or sweep – it's your ticket to trading success. With Valhalla, you'll be able to spot these liquidity pools and frame your directional bias with ease. They will serve you as an additional confluence for your entries and exits. ### **Scalper Alerts**
If enabled, will be triggered using the "Any Alert Function Call" Condition when creating an alert:
Additionally if you have the LIFETIME membership, you will also be able to automate the scalper signals by using conditional alerts for specific signals and direction:
# How To Customize Strategies Quick tutorial showing you how to customize Valhalla strategies and even create new ones for different symbols. {% embed url="" %} # Setting Up Alerts In this video, we will show you how to setup alerts for Valhalla. ## For discord alerts: You will find our automated Valhalla alerts inside our VIP channels of our discord community. If you would like to be notified of this alerts, head over to the "setup alerts" channel, from here, you can choose the role from the dropdown list below according to the alerts that you wish to be mentioned on.
For example, you can choose to be notified only of Crypto Alerts, Forex & Stocks alerts, or both. You will also find the option to be notified of the entry or stop loss updates from the strategies. This will assign you the proper roles automatically and you will be mentioned on every alert according to your choosing. ## For tradingview alerts: You can go ahead and press the 3 dots right next to the indicator settings. Then press the first "Add alert on Valhalla Indicator" option. Keep the any alert function call condition to be notified of Longs & Shorts. Alternatively, if you have a Valhalla Lifetime membership, you will also be able to select conditional alerts to split between longs and shorts, this will be useful if you wish to automate them via webhooks, if you choose conditional alerts make sure that you select the frequency as "once per bar". Next, select your expiration time and your desired alert actions. You can also change the name of the alert if you wish. Finally, just click create and your alert for the chosen pair will be ready, now just repeat the process with any other pair that you would like. Now, if you also wish to be notified of any changes on the dynamic next entry or stop loss price, you can setup the alerts as follows: As the condition choose either "Next Long update" or "Next short update", you will need to setup each one separately for each pair. Next, choose "Once per bar", your desired expiration time, alert actions, and finally the alert name and message. Leave the default placeholders if you wish to receive the symbol and the updated value within the message. Or you can also change it as you wish. And that's pretty much it, you will be notified when any changes of the next long or short entry occur. Thanks for watching! # Important Tips ## **Our Favorite Strategy for Crypto:** * Only signals with solid or strong performance grade * 1% of capital at risk per trade * Isolated Leverage * 100% Take Profit on TP3 * No more than 1-3 trades open at the same time * Longs + Shorts following the trend * SL: Opposite Signal (Adjust Dynamically) :warning: We advice you to create your own strategy according to your trading style, risk & capital management. ## Position Sizing One of the most important things in trading, do not overlook it! Make sure to always prepare your positions with a proper position size considering: * Your balance * The % of your balance that you want to risk per trade * The avg Stop Loss for the strategy, take profit level and it's R/R ratio.
You can use the official Valhalla Position Size & Risk Calculator, if you do not have access to it, feel free to reach out to us in order to request it. ## Additional Tips 1\. Try to avoid signals with a current "Risky" Performance Grade.
2\. Do not enter a trade if it has already reached TP2+. 3\. **IMPORTANT!** Try to avoid signals that do not follow the trend, or enter them with a smaller deposit. If Bitcoin is in a **bullish** trend, then give preference to **longs** rather than shorts, and vice versa. 4\. Do not try to win back/add more contracts/disable stops/enter again with a larger deposit after an unsuccessful signal. This is called the **"tilt"** mindset. Being tilted is a person's state of mind that is triggered by overwhelming emotions from winning or losing. A person cannot control the situation when they are tilted and makes risky decisions instead of deliberate ones – as a result, they **make many mistakes**. Strong emotions that overwhelm the person's mind forces them to act inadequately: to change the style of play to the riskiest one, which may turn out to be a good decision, of course, but leads to a **crushing defeat** more so than often. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FC7sHMpjZYFSGFRVc8VEw%2Fimage.png?alt=media\&token=4d98ae23-f5a7-4d36-9c0c-6555f483a566) If you find yourself having a "tilted" mind, just take a break and don’t trade for a couple of hours/days/weeks. 5\. If a series of signals have already been posted after another Bitcoin drop – for example, for a short, – and most strategies are **already** in good profit, then any further signals for a short should be avoided, because the correction is most likely **already over**, and there will be a **rebound** soon. In other words, it is better to expect opposite signals for a long. The same strategy above applies to a long. \- Always do your analysis. It is beneficial to rely on the indicator, but conducting research and analysis is highly recommended.\ \- It is recommended to use only 1-3% of your capital per trade. \ \- You can open several tabs in the browser and select a specific strategy in each tab. For example, one tab for the BTC strategy, another one for BCH, and the third one for EOS. ![](https://teletype.in/files/64/11/64115884-7dae-43b5-b833-8b33142ed1a7.png) # Overview ## The Core Philosophy: Structure-First Trading
Every indicator on your chart is doing the same thing, trying to answer one question: *who is in control right now, and is that about to change?* Most answer it with math. Moving averages, oscillators, momentum formulas, they process past prices through equations and give you a derived number. The problem is that derived numbers lag. By the time the formula catches the shift, price has already moved. Valhalla SMC answers it differently. Instead of computing a formula and hoping it correlates with what the market is doing, it reads the structure of the market itself — the actual sequence of highs and lows that define who is in control. This is the raw, unfiltered footprint of the battle between buyers and sellers, and it is the single most reliable framework for understanding price action. This is what we mean by **structure-first**: market structure is not one of many inputs. It is the only input. Every other feature in the indicator, the trend band, the signals, the grading system, the targets, derives its state from structure. Nothing in Valhalla SMC can disagree with the structural read, because nothing operates independently of it. ### The Three States of Any Market Strip away the noise, and price is always doing one of three things: **Trending Bullish** - Buyers are in control. Price is making higher highs and higher lows, pushing upward in a staircase pattern. Each pullback holds above the last one, and each push makes new ground. **Trending Bearish** - Sellers are in control. Price is making lower highs and lower lows, descending step by step. Each rally fails to reclaim the previous peak, and each decline cuts deeper. **Consolidation** - Neither side has won. Price moves sideways in a range, with buyers and sellers reaching a temporary equilibrium. This state always resolves, eventually one side overwhelms the other, and a new trend begins. Valhalla SMC is built to identify which of these states the market is in, and more importantly to detect the exact moment it transitions from one state to another. That transition point is where the highest-conviction trades live. {% hint style="info" %} **Decision-Support Tool** Valhalla SMC is designed as a decision-support framework, not a standalone signal generator. It surfaces institutional-grade market structure, grades the conviction behind each setup, and provides structure-anchored targets, but the final trading decision is always yours. {% endhint %} #### What's included {% columns %} {% column %} **Market Structure** Automatic BOS/CHOCH detection from swings, with full HH/HL/LH/LL labeling. **Dual Signal Modes** CHOCH Entry for reversal trades, Continuation Entry for pullback-to-band re-entries. **Smart TP System** Three-tier targets: TP1 Swing, TP2 Order Block, TP3 HTF Liquidity or fixed R multiples. **Clarity Candles** Structure-colored bars with band-reaction zones highlighted in orange and purple. {% endcolumn %} {% column %} **Trend Band** Structure-slaved 3-line trailing ribbon. Always agrees with the current structural state. **A / B / C Grading** Market-mechanics scoring system grades every signal by conviction level. **Order Blocks** Structure-shift OBs with strength tiers, automatic mitigation removal, and volume labels. **Dashboard & Stats** Live trend state, session, MTF alignment, plus a full performance statistics panel. {% endcolumn %} {% endcolumns %} # Quick Start Get Valhalla SMC on your chart and running in under two minutes. #### Step 1: Add the Indicator Open TradingView, click **Indicators** at the top of your chart, search for **Valhalla SMC**, and add it to your chart. You'll immediately see structure lines, the trend band, and the dashboard. #### Step 2: Choose Your Signal Mode Open Settings → **Signals** → **Signals Mode**. Pick the mode that matches your style: | Mode | Best For | | -------------------- | ------------------------------------------------------------- | | `CHOCH Entry` | Reversal traders, signals fire on structure shifts | | `Continuation Entry` | Trend-followers, signals fire on pullbacks to the band | | `Both` | See all setups, CHOCH entries + continuation entries together | #### Step 3: Set Your Time Horizon The **Time Horizon** setting (under Market Structure) is the most important setting in the SMC Indicator, it controls how many bars the algorithm uses to analyze previous price action. Lower values (5–8) react faster with more frequent CHOCH structure events:
Higher values (12–40+) produce cleaner, more significant structure. The default of **10** is a solid middle ground:
{% hint style="info" %} **TIP** If you want to receive a higher amount of pullback signals, we recommend setting the Time Horizon setting to a higher value. {% endhint %} #### Step 4: Configure Targets Under **Bull / Bear Signals and Continuation Signals**, you can choose between `Smart` targets (structure-anchored TP1/TP2/TP3) or `Fixed R Multiples`. Smart mode is recommended, it automatically finds structural swing targets, opposing order blocks, and HTF liquidity pools. Smart mode sources each TP level from a different structural element, creating a three-tier target system anchored to real market levels rather than arbitrary R multiples. #### Smart Mode Structural Targets:
TargetSource (CHOCH)Source (Continuation)Logic
TP1Nearest structural swingPullback-origin swingThe closest swing high (for longs) or swing low (for shorts) above/below entry that price hasn't reached yet
TP2Nearest opposing order blockNearest opposing order blockThe closest unmitigated OB in the opposing direction, the first "wall" side of the OB zone
TP3HTF liquidity poolHTF liquidity poolThe nearest active (unpurged) HTF session high/low beyond the trade's existing targets
#### Missing Levels Smart mode skips any level that doesn't have a valid structural target. If no opposing swing exists above entry, TP1 simply won't be drawn. If all three sources are missing, the indicator falls back to fixed R multiples. Labels indicate the source: `TP1 Swing`, `TP2 OB`, `TP3 Liq`. {% hint style="info" %} It's Important to note that each TP Target in Smart Mode is Independent from each other, meaning in some cases the TP3 could appear before the TP2 and so on. {% endhint %} #### Fixed R Mode When Target Mode is set to `Fixed R Multiples`, all three targets are computed as simple multiples of the risk (distance from entry to SL). Defaults: TP1 = 0.5R, TP2 = 1R, TP3 = 1.5R. These are fully configurable in settings. {% hint style="info" %} **TIP** Start with the defaults and observe 20–30 signals before tweaking. The grade filter (`Minimum Grade to Show Signal`) is one of the most impactful settings, setting it to `B` removes the lowest-conviction setups. {% endhint %} # CHOCH Entry Signals CHOCH Entry signals fire when market structure shifts, a bearish trend breaks to bullish (BULL signal) or a bullish trend breaks to bearish (BEAR signal). These are reversal entries at the point of structural change. #### How CHOCH Signals Fire A BULL signal triggers when all of these are true: * Signal mode is set to "CHOCH Entry" or "Both" * A bullish CHOCH event just occurred (close broke above the swing high while structure was bearish) * The signal's grade meets the minimum grade filter
A BEAR signal follows the inverse logic: a bearish CHOCH (close broke below the swing low while structure was bullish), subject to the same mode and grade filters.
# Continuation Signals Continuation signals fire when price pulls back to the trend band *after* a CHOCH has established the bias. These are with-trend entries at a better price, with tighter stops. #### Trigger Conditions A continuation BUY fires when: * Structure is bullish * At least 2 bars have passed since the last structure flip (so the band is established) * The previous bar's low touched or pierced the trailing band line * The previous bar's close remained above the band (bounce, not breakdown) * Enough bars have passed since the last continuation signal (cooldown = `Time Horizon`) * No CHOCH signal fired on the same bar * The continuation grade meets the minimum filter
Continuation SELL signals follow the inverse for bearish structure.
#### Continuation Labels Continuation signals use smaller labels than CHOCH signals. BUY appears as a small cyan label below the touch bar; SELL as a small red label above. When the marker-only mode is active, simple `▲` / `▼` triangles mark the touch without TP/SL levels. #### Stop Loss Modes | Mode | SL Placement | Best For | | --------------- | ------------------------------------------ | ------------------------------------- | | `Band + Buffer` | Just beyond the trailing band line (tight) | Aggressive entries with tight risk | | `Recent Swing` | Below/above the most recent swing low/high | Wider stop with structural validation | #### Continuation vs. CHOCH Take Profit Targets In Smart mode, continuation signals use a different TP1 source than CHOCH signals. TP1 for continuation is the **pullback-origin swing,** the most recent swing that formed after the structure flip. This is the minimum level the trend must reclaim to prove itself. TP2 and TP3 use the same sources as CHOCH (nearest opposing OB and HTF liquidity, respectively). # TP / SL Engine Every signal generates a complete trade setup with an entry level, stop loss, and up to three take-profit targets. Lines extend from the signal bar until the next signal replaces them.
#### Stop Loss Placement For **CHOCH entries**, the SL is placed at the swing that created the CHOCH, the structural invalidation level. If the broken swing was a swing low (for a BULL signal), the SL sits at that swing low minus an optional ATR buffer. This is the price level where the structure thesis is definitively wrong. For **continuation entries**, the SL mode is configurable: either tight to the band (Band + Buffer) or at the recent swing (Recent Swing). #### Trade Lifecycle A trade is "active" from the moment its signal fires until the next signal replaces it. During this time: * Entry, SL, and TP lines extend rightward each bar * Labels follow the rightmost bar * TP hit markers fire when price reaches each level (if enabled) #### SL Visibility The `Show SL Level` toggle controls whether the SL line is drawn on the chart. When hidden, the trade stays active until TP3 is hit or a new signal fires, you manage your own stop. #### TP Hit Markers When `Show TP Hit Markers` is enabled, small labeled markers (`TP1`, `TP2`, `TP3`) appear on the bar where each target level is reached. Once the SL is hit (when visible), no further TP markers will appear, the trade is considered dead. #### Line Cleanup The `Keep Lines After Trade Resolves` setting controls whether old setups remain on the chart as frozen history or are removed when the next signal fires. # HTF Liquidity Pools Valhalla SMC tracks session highs and lows from two configurable higher-timeframe candles as liquidity pools, the levels where retail stops cluster and institutions target for sweeps. #### How Levels Are Collected When a new HTF candle closes, the **previous** session's high and low are pushed into an active pool. Two timeframes can be configured (defaults: 4H and Daily), providing liquidity levels from multiple structural scales. Duplicate levels within 10% of ATR are automatically deduplicated, and the pool caps at 10 active levels per side. #### Purging A liquidity level is "purged" (removed from the active pool) when price trades through it, the wick or close exceeds the level. This mirrors the institutional concept of liquidity sweeps: once the stops at a level have been taken, that level is no longer an active magnet. #### Role in Smart Targets The nearest unpurged liquidity level in the trade direction becomes TP3 in Smart mode. For a long trade, the indicator finds the closest active session high above entry; for a short, the closest active session low below entry. This gives TP3 a fundamentally different character than TP1 and TP2, it represents where institutional order flow is likely to target, rather than where structure has formed.
#### Settings | Setting | Default | Purpose | | --------------------------- | ------- | --------------------------------------------- | | `TP3 Liquidity Timeframe` | 4H | Primary timeframe for session high/low levels | | `TP3 Liquidity Timeframe 2` | D | Secondary timeframe for additional levels | # Next CHOCH Level This optional feature projects the exact price level that would produce the next CHOCH event if price were to close through it.
#### How It Works If structure is currently bullish, the next CHOCH would be bearish, triggered by a close below the current swing low. If structure is bearish, the next CHOCH would be bullish, triggered by a close above the current swing high. The level is *known in advance*; whether price reaches it is not. # Order Blocks Order blocks are supply/demand zones created at structural shifts. They mark the origin candle of the impulse move that caused the BOS or CHOCH, the last opposing candle before the institutional push.
#### Detection Logic When a BOS or CHOCH fires, the indicator scans backward from the **swing bar** (not the break bar) to find the last opposing candle. For a bullish OB, it finds the last bearish candle (close < open) before the upward impulse. The OB zone spans from that candle's open to its low. For a bearish OB, it's the last bullish candle, with the zone from its high to its open. #### Positional Filtering Bull OBs must sit below the broken swing high (support zone), and bear OBs must sit above the broken swing low (resistance zone). This prevents OBs from appearing on the wrong side of the structure break. #### Strength Tiers Each OB is classified by the size of its zone relative to ATR: | Tier | Zone Size / ATR | Interpretation | | ----- | --------------- | ------------------------------------------- | | `+` | < 1.5× | Standard - normal OB | | `++` | 1.5× – 2.5× | Strong - wider institutional zone | | `+++` | > 2.5× | Major - significant supply/demand imbalance | #### Mitigation OB zones extend rightward indefinitely and are automatically removed (mitigated) when price closes through the zone: a bull OB is mitigated when close drops below its bottom edge, and a bear OB when close rises above its top edge. The `Max Active Blocks` setting caps how many OBs are visible at once, oldest are removed first when the cap is reached. #### Role in Grading & Targets Order blocks serve double duty. The signal grade system checks whether the entry price falls inside an unmitigated OB (OB confluence factor). The Smart TP system uses the nearest *opposing* OB as the TP2 target, the first structural "wall" in the trade's path. # Clarity Candles Clarity Candles replace the default chart colors with a structure-aware coloring scheme that shows you the trend state and band interaction at a glance. #### Structure Colors When candle coloring is enabled, bars are colored based on the current structural state: teal/cyan during bullish structure, red during bearish structure, and gray during neutral. This gives an instant visual read on which side of the market owns the structure. #### Reaction Colors When a candle's close is within 0.6× ATR of the trailing band line, it's in the "reaction zone" — the area where the band is actively being tested. These candles override the structure color: | Color | Condition | Meaning | | --------------------------------------------- | ---------------------------------------- | -------------------------------------------------- | | ● Orange | Near band + bullish close (close ≥ open) | Potential bounce — buying pressure at the band | | ● Purple | Near band + bearish close (close < open) | Potential breakdown — selling pressure at the band | #### Trend Background The `Trend Background` toggle adds a subtle full-chart background tint: dark teal during bullish structure, dark red during bearish. This is the widest-angle view of market state available in the indicator. # Alerts Valhalla SMC provides built-in alert conditions you can connect to TradingView's alert system for real-time notifications. #### Available Alerts | Alert Name | Fires When | | ------------------- | ------------------------------------------------ | | `BULL` | A BULL (CHOCH) signal is confirmed | | `BEAR` | A BEAR (CHOCH) signal is confirmed | | `BOS Bullish` | A bullish Break of Structure event occurs | | `BOS Bearish` | A bearish Break of Structure event occurs | | `Continuation BUY` | A continuation BUY signal fires (band pullback) | | `Continuation SELL` | A continuation SELL signal fires (band pullback) | #### Setting Up Alerts To create an alert, right-click the indicator name on your chart → **Add Alert**. Select the Valhalla SMC indicator as the condition source, choose the specific alert from the dropdown, and configure your notification preferences (popup, email, webhook, etc.). # Strategies Here's a list of all of our actual custom strategies: ## **CRYPTO** | BTCUSDT.P - Binance \| 1m, 5m, 15m, 1h | | -------------------------------------------- | | ETHUSDT.P - Binance \| 1m, 5m, 15m, 1h | | 1000BONKUSDT.P - Binance \| 1m, 5m, 15m, 1h | | 1000FLOKIUSDT.P - Binance \| 1m, 5m, 15m, 1h | | 1000PEPEUSDT.P - Binance \| 1m, 5m, 15m, 1h | | AAVEUSDT.P - Binance \| 1m, 5m, 15m, 1h | | ARCUSDT.P - Binance \| 1m, 5m, 15m, 1h | | AVAXUSDT.P - Binance \| 1m, 5m, 1h | | AXSUSDT.P - Binance \| 1m, 5m, 15m, 1h | | C98USDT.P - Binance \| 1m, 5m | | CAKEUSDT.P - Binance \| 1m, 5m, 15m, 1h | | CHRUSDT.P - Binance \| 1m, 5m, 15m, 1h | | CRVUSDT.P - Binance \| 1m, 5m, 15m, 1h | | DOGEUSDT.P - Binance \| 1m, 5m, 15m, 1h | | ENAUSDT.P - Binance \| 1m, 5m, 15m, 1h | | FARTCOINUSDT.P - Binance \| 1m, 5m, 1h | | HBARUSDT.P - Binance \| 5m, 15m, 1h | | INJUSDT.P - Binance \| 1m, 5m, 15m, 1h | | JUPUSDT.P - Binance \| 1m, 5m, 15m, 1h | | KASUSDT.P - Binance \| 5m, 15m, 1h | | NEARUSDT.P - Binance \| 1m, 5m, 15m, 1h | | ONDOUSDT.P - Binance \| 1m, 5m, 15m, 1h | | ORCAUSDT.P - Binance \| 1m, 5m, 15m, 1h | | PEOPLEUSDT.P - Binance \| 1m, 5m, 15m, 1h | | PROMPTUSDT.P - Binance \| 1m, 15m, 1h | | RENDERUSDT.P - Binance \| 1m, 5m, 15m, 1h | | RSRUSDT.P - Binance \| 1m, 5m, 15m, 1h | | SOLUSDT.P - Binance \| 1m, 5m, 1h | | TAOUSDT.P - Binance \| 1m, 5m, 15m, 1h | | TRBUSDT.P - Binance \| 1m, 5m, 15m, 1h | | TRUUSDT.P - Binance \| 1m, 5m, 15m, 1h | | TRUMPUSDT.P - Binance \| 1m, 5m, 15m, 1h | | XRPUSDT.P - Binance \| 1m, 5m, 15m | | ZECUSDT.P - Binance \| 1m, 5m, 15m, 1h | ## **STOCKS** | ABBV - NYSE \| 1m, 5m, 15m | | ------------------------------------------- | | AMC - NYSE \| 1m, 5m, 15m, 1h | | AMD - NASDAQ \| 1m, 5m, 15m, 1h | | AMZN - NASDAQ \| 5m, 15m, 1h | | APPL - NASDAQ \| 15m, 1h | | AVGO - NASDAQ \| 1m, 5m, 15m, 1h | | GOOGL - NASDAQ \| 1m, 5m, 15m, 1h | | JPM - NYSE \| 1m, 5m, 15m, 1h | | LLY - NYSE \| 1m, 5m, 15m, 1h | | META - NASDAQ \| 5m, 15m, 1h | | NFLX - NASDAQ \| 1m, 5m, 15m, 1h | | NVDA - NASDAQ \| 5m, 15m, 1h | | PG - NYSE \| 1m, 5m, 15m | | PM - NYSE \| 1m, 5m, 15m | | SHOP - NASDAQ \| 1m, 5m, 15m, 1h | | SPOT - NYSE \| 1m, 5m, 15m, 1h | | TSLA - NASDAQ \| 1m, 5m, 15m, 1h | | UBER - NYSE \| 1m, 5m, 15m | | WFC - NYSE \| 1m, 5m, 15m, 1h | | XOM - NYSE \| 1m, 15m | | GBP Futures (6B1!) - CME \| 1m, 5m, 15m, 1h | | EUR Futures (6E1!) - CME \| 1m, 5m, 15m, 1h | | BANKNIFTY - NSE \| 1m, 5m, 15m, 1h | | CL1! - NYMEX \| 1m, 5m, 15m, 1h | | DAX 40 - IG \| 1m, 5m, 15m, 1h | | ES1! - CME \| 1m, 5m, 15m, 1h | | GC1! - COMEX \| 1m, 5m, 15m, 1h | | IWM - NYSE \| 1m, 5m, 15m, 1h | | MES1! - CME \| 1m, 5m, 15m, 1h | | MNQ1! - CME \| 5m, 15m, 1h | | NAS100USD - OANDA \| 5m, 15m, 1h | | Netherlands 25 Cash - IG \| 15m, 1h | | NIFTY - NSE \| 1m, 5m, 15m, 1h | | NQ1! - CME \| 1m, 5m, 15m, 1h | | QQQ - NASDAQ \| 1m, 5m, 15m, 1h | | RTY1! - CME \| 1m, 5m, 15m, 1h | | SPX - SP \| 5m, 15m, 1h | | US30 - Pepperstone \| 15m, 1h | | US100 \| 1m, 5m, 15m, 1h | | US500 - Pepperstone \| 5m, 15m, 1h | | UK100 - Pepperstone \| 1m, 15m, 1h | | YM1! - CBOT \| 1m, 5m, 15m, 1h | ## **MISC** | BR1! (Oil) - MOEX \| 5m, 15m, 1h | | ------------------------------------------ | | RB1! (Gasoline) - NYMEX \| 1m, 5m, 15m, 1h | | XAG/USD (Silver) - OANDA \| 5m, 15m, 1h | | XAU/USD (Gold) - OANDA \| 1m, 5m, 15m, 1h | | AUD/JPY - OANDA \| 1m, 5m, 15m | | EUR/JPY - OANDA \| 15m, 1h | | EUR/USD - OANDA \| 15m, 1h | | GBP/JPY - OANDA \| 1m, 5m, 15m, 1h | | NZD/USD - OANDA \| 15m, 1h | | USD/JPY - OANDA \| 5m, 15m, 1h | # Strategies Test Here's a list of all of our actual custom strategies: ## **CRYPTO** | BTCUSDT.P - Binance \| 5min | | --------------------------------- | | BTCUSDT.P - Binance \| 450min | | ETHUSDT.P - Binance \| 5min | | BTCUSDT.P - Binance \| 4hrs | | ETHUSDT.P - Binance \| 4hrs | | 1000FLOKIUSDT.P - Binance \| 5min | | 1000PEPEUSDT.P - Binance \| 5min | | ARBUSDT.P - Binance \| 5min | | ARCUSDT.P - Binance \| 5min | | ATOMUSDT.P - Binance \| 5min | | AVAXUSDT.P - Binance \| 5min | | BONKUSDT.P - Binance \| 5min | | DOGEUSDT.P - Binance \| 5min | | DYDXUSDT.P - Binance \| 5min | | EGLDUSDT.P - Binance \| 5min | | HYPEUSDT.P - Binance \| 5min | | ICPUSDT.P - Binance \| 5min | | JUPUSDT.P - Binance \| 5min | | KASUSDT.P - Binance \| 5min | | LINKUSDT.P - Binance \| 5min | | LTCUSDT.P - Binance \| 5min | | NEARUSDT.P - Binance \| 5min | | POLUSDT.P - Binance \| 5min | | RENDERUSDT.P - Binance \| 5min | | RSRUSDT.P - Binance \| 5min | | SUIUSDT.P - Binance \| 5min | | SUSHIUSDT.P - Binance \| 5min | | TONUSDT.P - Binance \| 5min | | TRBUSDT.P - Binance \| 5min | | TRUMPUSDT.P - Binance \| 5min | | | | | | 1000SHIBUSDT.P - Binance \| 30min | | ALICEUSDT.P - Binance \| 30min | | ATAUSDT.P - Binance \| 30min | | AXSUSDT.P - Binance \| 30min | | C98USDT.P - Binance \| 30min | | CHRUSDT.P - Binance \| 30min | | CRVUSDT.P - Binance \| 30min | | DYDXUSDT.P - Binance \| 30min | | LTCUSDT.P - Binance \| 30min | | NEARUSDT.P - Binance \| 30min | | PEOPLEUSDT.P - Binance \| 30min | | SOLUSDT.P - Binance \| 30min | | SXPUSDT.P - Binance \| 30min | | ZILUSDT.P - Binance \| 30min | | ORCAUSDT.P - Binance \| 5min | ## **STOCKS** | ABBV - NYSE \| 5min | | -------------------------- | | AMC - NYSE \| 5min | | AMC - NYSE \| 15min | | AMD - NASDAQ \| 5min | | AMZN - NASDAQ \| 5min | | APPL - NASDAQ \| 5min | | AVGO - NASDAQ \| 5min | | GOOGL - NASDAQ \| 5min | | HD - NYSE \| 5min | | JPM - NYSE \| 5min | | LLY - NYSE \| 5min | | MSFT - NASDAQ \| 5min | | NFLX - NASDAQ \| 15min | | NVDA - NASDAQ \| 5min | | PG - NYSE \| 5min | | PM - NYSE \| 5min | | SHOP - NASDAQ \| 5min | | SPOT - NYSE \| 5min | | TSLA - NASDAQ \| 5min | | UBER - NYSE \| 5min | | WFC - NYSE \| 5min | | XOM - NYSE \| 5min | | BANKNIFTY - NSE \| 5min | | NAS100USD - OANDA \| 15min | | NIFTY - NSE \| 5min | | NQ1! - CME \| 5min | | QQQ - NASDAQ \| 5min | | SPX - SP \| 5min | | SPX - SP \| 1hr | | YM1! - CBOT \| 5min | ## **MISC** | BR1! (Oil) - MOEX \| 30min | | -------------------------------- | | RB1! (Gasoline) - NYMEX \| 5min | | RB1! (Gasoline) - NYMEX \| 30min | | XAG/USD (Silver) - OANDA \| 5min | | XAG/USD (Silver) - OANDA \| 1hr | | XAU/USD (Gold) - OANDA \| 1min | # Affiliate Program # Crypto - Finandy {% embed url="" %} **Entry Price Variables:** {{plot("Long entry")}}\ {{plot("Short entry")}} **Take Profit Variables:** {{plot("TP1 Long")}}\ {{plot("TP2 Long")}}\ {{plot("TP3 Long")}} {{plot("TP1 Short")}}\ {{plot("TP2 Short")}}\ {{plot("TP3 Short")}} **Dynamic Stop Loss Variables:** {{plot("Dynamic SL Long")}}\ {{plot("Dynamic SL Short")}} {% hint style="warning" %} The variables are caps sensitive, so make sure that you use them as shown above. {% endhint %} # MT5 Automation For automating your Valhalla Trades to MT5, we recommend using the platform TradeSgnl: {% embed url="" %} {% embed url="" %} ### Valhalla Placeholder Variables: **Entry Price Variables:** {{plot("Long entry")}}\ {{plot("Short entry")}} **Take Profit Variables:** {{plot("TP1 Long")}}\ {{plot("TP2 Long")}}\ {{plot("TP3 Long")}} {{plot("TP1 Short")}}\ {{plot("TP2 Short")}}\ {{plot("TP3 Short")}} **Dynamic Stop Loss Variables:** {{plot("Dynamic SL Long")}}\ {{plot("Dynamic SL Short")}} ### TradeSgnal Placeholder Variables: **Take Profit Variables:** * tp1\_price= * tp2\_price= * tp3\_price= {% hint style="info" %} TradeSgnal allows to use as many take profit targets as you would like. {% endhint %} By default it will use their "Smart" algorithm to determine the % of the position to exit on each take profit level, but you can also specify it for each take profit as follows:
* pct1= * pct2= * pct3= {% hint style="info" %} Example: Use the value 0.5 on a pct variable to exit 50% of the position on it. {% endhint %} Example Alert Message Setup: # Product Questions ### PRODUCT QUESTIONS **How does it work?** Valhalla Indicator is based on the Tradingview platform. Our indicator will display all the info you need directly in your chart, including entry points, stop-loss, take-profit levels, strategy information and much more. **Is a Premium TradingView subscription required?** No, all you need is a free account. **What markets & timeframes does Valhalla work with?** What makes Valhalla different from all of the other indicators is that it includes its own set of custom strategies for specific markets and timeframes. Including Crypto, Forex and stocks on Timeframes 15m, 30m, 45m and 4hr. You can still apply Valhalla to any asset and timeframe you desire but we strongly suggest using its own set of optimized strategies. You can see the full list in here: **Are there any alerts?** Yes, you will receive alerts inside our Premium Discord & Telegram Channels + you can configure our Telegram Bot to forward alerts directly to you. The alerts will keep you informed about new opportunities. **How many signals does the indicator provide per week?** Around 30-50 signals per week if you use our “Use the opposite signal as stop loss” feature, if not, you can get over 100+ . **How much can I earn?** This will depend entirely on your budget and strategy, we will provide you details of our preferred trading strategies, risk & capital management. **Will I get access to the community?** Absolutely! You will be granted Premium Access inside our Discord Community. **Can I use this if I have no trading experience?** Yes, although it is preferred if you have some experience using the trading platform that you choose to trade with, for example, Binance. You will just need to follow our Setup Guide and you will be up and running in no time. You can find our entire documentation in here: **What is the difference between you and XXXX indicator?** Valhalla knows and gives you EXACTLY the entry price of the next signal, so that you can prepare your trade ahead of time. Forget about running to your computer after a signal is triggered from the other indicators. Or waiting for "candle close for confirmation" of the signal, letting you out of a potential squeeze of profits in a really short time. Valhalla will tell you EXACTLY where to place your trade ahead of time with EXTREMELY HIGH ACCURACY **Where can I view statistics?** You will be able to see the Accuracy of all of our strategies and their different Take Profit Levels, so that you can plan accordingly. They will be displayed in the chart: ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FQHDpYT57l2j2d7EDw5zZ%2Fimage.png?alt=media\&token=406d20eb-7c6b-4936-8821-2768ef5dabb7) **What is the average win rate (accuracy) of the indicator?** 85-93% on most of our custom strategies. **Is it auto or manual trading?** We have both options available. Automation via webhooks is supported only in our Lifetime Membership.
**What strategies/pairs are supported?** We have 130+ strategies, including Crypto, Stocks and Misc, for the complete list of supported pairs, please refer to our documentation: **Do you have a trial?** Yes, we have a 7 Day Trial available for you to check for yourself the accuracy of our indicator, besides this, we constantly share free alerts + have a livestream running 24/7 with Valhalla Indicator on the most voted asset of the week by the community. #### Does it repaint? Our signals do **not** repaint, appear in real-time, and are confirmed on candle close. Repainting is where signals change based on data in the future to make them appear differently than they really are. #### Is this friendly for beginners? You don't need much experience to understand the signals & features provided by Valhalla. However, trading can be difficult and takes time to learn regardless of the indicators on your charts. If you're new to trading / technical analysis in general, we recommend paper-trading at first and studying risk management until you get familiar with how it all works to build some confidence in trading. There is no magical indicator, algorithm, robot, EA, or signal provider that will enable you to effortlessly make money in the markets. #### ### ORDERS #### How do I cancel? When signing up for a subscription, you are agreeing to recurring payments of the monthly fees. This means that, every month the amount of the monthly subscription will be charged, whether on the credit card registered at the time of the purchase (automatic charges), or by the bank slips sent to your email. Canceling the subscription does not imply the refund of the amount already invested, it just **cancels future charges**. You can get the refund from the last recurrency paid if it’s within the return deadline. To cancel: 1\) To cancel simply let us know via email (), Telegram (@ValhallaSupport) or Discord. #### Will the price of my subscription ever change? No, the price you signed up for is the price you will keep forever as long as you stay signed up. We will **never** change the price of your subscription. All members are grandfathered into the price they first signed up at regardless of any price increases we do in the future. #### How long does it take to get access after purchasing? After signing up, please submit a ticket through our Discord channel with your payment email and TradingView username, we will get back to you and grant you access within a few hours. #### Can I switch access to a different TradingView account? Yes you can, please send the new username alongside your old username to and our support team will adjust this for you manually within 6 hours. # What Is Valhalla Indicator? ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FjjvXtfr8o45Kcqc7MbwM%2FValhalla%204.gif?alt=media\&token=d637157b-d3cf-4048-ae39-74e6e4a6956e) Valhalla is a Trading Indicator developed by members with a background in finance, machine learning, algo-based trading, marketing, quantitative analysis & development. The core value and goal of our team is to simplify the trading experience for traders from all levels. Allowing them to be stress free during their entire journey. We understand how overwhelming trying to follow other indicators can be, hell, even their documentation, and trying to find the perfect configuration only for it to stop working after a few trades. Or even worse, not even knowing when that next alert will trigger. Chasing trades always one step behind. Forget about the “works with all markets” bs indicators, Valhalla is a set of custom powerful strategies for specific assets built by experienced traders at your fingertips. Including Crypto, Forex and stocks on Timeframes 15m, 30m, 45m and 4hr. {% hint style="info" %} You can still apply Valhalla to any asset and timeframe you desire but we strongly suggest using its own set of optimized strategies. {% endhint %} ## Community is key. We also understand how hard and lonely the journey can get, this is why we created a community full of passionate traders from all levels, so that you can interact and have a break from all of those hard moments. You won't be left alone. Our staff will personally assist you with the questions that you might have and even provide their opinion on your current strategy and capital management plan. Share your wins, give us your suggestions, get free alerts and join member challenges, all inside of our Discord Community. Join Today by [clicking here.](https://discord.gg/uskMJpQ95c) ### Get Access to Valhalla: # What is TradingView? ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2F2tHNogIhsoUvv3rfQBt1%2Fimage.png?alt=media\&token=7d742cf3-e3ff-4ee7-9c35-96bafe7e7216) [TradingView ](https://www.tradingview.com)is a free charting platform and social network where traders/investors can **look** at financial charts and use a wide variety of tools to spot opportunity in every market across Stocks, Forex, Crypto, Futures & Commodities. TradingView users can connect most brokers to trade directly on the platform and **leap** into opportunities as they are presented in real time from their charts. {% hint style="info" %} This is the great platform where Valhalla Indicator is hosted. You can create a free account on TradingView and then after signing up on [our website](https://valhallaindicator.com) receive instant-access to use our products from your indicators folder. {% endhint %} ### How To Create A TradingView Account In order to create a TradingView account, you need to go to the TradingView [homepage](https://www.tradingview.com). Click on "Sign in" at the top right of the homepage, then click on "Sign up" at the bottom of the current window. You can sign up using your social media profiles or an email address. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FHt2EWRRjMUFoDYFvQKpS%2Fimage.png?alt=media\&token=7e723481-95b3-490c-a4cc-d2727ac2be83) ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2F8dKXXS5915T9DTFU39nd%2Fimage.png?alt=media\&token=e1ac3626-99ed-469a-81e2-e43892ec07ad) ### TradingView Charts #### How To Open A Chart On TradingView ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2Fz6CFXGpSwyE5HATSINIt%2Fimage.png?alt=media\&token=d3886bc7-88f4-460b-87e5-3c775569a209) You can open a chart on TradingView by clicking on 'Chart', located at the top left of the website when you are logged in. #### How To Change Symbol ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FEBlwbb13uiTuXyYloJmT%2Fimage.png?alt=media\&token=6229b94a-9ee7-4131-af3b-85df565962eb) You can change the symbol of the chart by clicking on the top left section containing the current chart ticker. {% hint style="info" %} You can also directly type the name of the symbol on your keyboard. {% endhint %} Once you click on it you will be able to search for specific symbols. You can also filter out symbols by markets or exchange. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FUjHwN1EyLcY1PhPVqMlp%2Fimage.png?alt=media\&token=baf828d6-c09c-43b1-a90a-9916fd9bc8f4) ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2Ft8jUEydVOyvqDmCmn2w4%2Fimage.png?alt=media\&token=ce16b1ab-46f5-4ce5-9b9b-21d0dbda1f3c) #### Change Chart Timeframe ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FLRdbTpu8DfwBv5zfg3L3%2Fimage.png?alt=media\&token=06f09046-c0f1-4368-a414-c56921324faa) Timeframes determine the frequency at which a new candle is displayed on the chart. To change the timeframe of your chart simply click on the section at the right of the ticker name and select a timeframe of interest. {% hint style="info" %} You can also type the timeframe directly on your keyboard to change it. {% endhint %} #### Add Indicators To Your Chart ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2F87Ar3K0bpqLMRawhpN8P%2Fimage.png?alt=media\&token=0904216d-fddb-4fd2-a865-f8257bc39d59) Click on the **fx** symbol at the top of the chart, this will open a menu, search for the indicator and click on it to add it to the chart. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FENGLIoG0sAx2jcSjYs4S%2Fimage.png?alt=media\&token=91bf9aa5-155c-43f7-944b-fadb4f1432c7) #### Save A Chart Layout You can create, delete and save chart layouts on TradingView. Once you make a change on a layout, you will need to save these changes, all you need to do is to click on the cloud symbol at the top right of the chart. ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FtCGVfJysvp3EqJbKn8iC%2Fimage.png?alt=media\&token=62551844-dc59-4d54-b185-126b6743018f) {% hint style="info" %} You can also save a chart layout by pressing `ctrl + s` or `cmd + s` for mac users, on your keyboard. {% endhint %} # Our Discord Community Discord is a free instant-messaging platform for participating in communities. Below you will find the basics on how to create a free Discord account and how to get VIP access in the community. {% hint style="info" %} This is the platform where we host our community, automated alerts, and bots to further optimize our technical trading tools. {% endhint %} ### Create A Free Discord Account To create a discord account go to the [Discord website](https://discord.com) and download the Discord software of open it from your browser and enter your desired username. ### Joining The Discord ![](https://1852853856-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCfunqIZ7blPnOy5EMsCY%2Fuploads%2FpmbHsCGI0bN2CrjleibX%2Fimage.png?alt=media\&token=51b4e359-8310-46d4-a249-f2cbaf10ab50) When you first join our server, you won't be able to see anything besides our public channels. You can get help in the #support channel, see our announcements, free signals, giveaways, get helpful information regarding Valhalla Indicator, and learn how to sign up. If you haven't already joined, [click here.](https://discord.gg/uskMJpQ95c) ### The VIP Role The VIP role is granted to users who signed up on [our website](https://valhallaindicator.com). To get VIP Discord access, follow the instructions on the next page. The VIP role gives you access to all of the hidden chats with our entire community who share their trades, helping each other with analysis across every market, and conversate with each other in all the VIP channels. # Support Need direct support on your order or have any other questions? Send an email to Submit a ticket through our Discord Server: Request support through our Telegram Group: Message us directly in Telegram: # Terms of Use ### WARNING It is strictly **forbidden** to resell, forward our signals to other groups on a commercial basis.\ If your account is suspected of the above actions, your account will be **immediately blocked** without the possibility of a refund.